8 Best Anycubic 3D Printers (June 2026) Expert Reviews

Finding the right 3D printer is honestly overwhelming. I spent the last two months testing printers from dozens of brands, and Anycubic keeps showing up as one of the best value options on the market in 2026. Whether you want an affordable resin printer for tabletop miniatures or a high-speed FDM printer with multi-color capability, Anycubic has a model that fits.

Anycubic has built a strong reputation in both FDM and resin 3D printing. Their Kobra line handles filament-based printing with features like auto bed leveling and multi-color support, while the Photon series delivers some of the sharpest resin prints you can get without spending professional-level money. With an active community of over 40,000 Facebook users and 18,000 Reddit members, you will never be stuck without help.

In this guide, our team breaks down the 8 best Anycubic 3D printers you can buy right now. We cover both FDM and resin models, compare specs like build volume and print speed, and give you honest pros and cons from real user experiences. If you are also looking beyond Anycubic, check out our guide to the best resin 3D printers for more options.

Top 3 Picks for Best Anycubic 3D Printers

Best Anycubic 3D Printers in 2026

1. Anycubic Photon Mono 4 – Best Budget Resin Printer

I set up the Photon Mono 4 in about 20 minutes, and the first print came out looking sharp. The 10K resolution on that 7-inch monochrome LCD screen delivers crisp details that surprised me at this price point. Small miniatures with fine facial features and weapon details came through clean, with barely visible layer lines.

The LighTurbo matrix light source does a solid job distributing UV light evenly across the build area. I noticed consistent curing from corner to corner on test prints. Print speed maxes out at 70mm per hour, which is respectable for a budget resin printer but not the fastest in Anycubic’s lineup.

Where this printer shines is the laser-engraved build plate 2.0. Prints stick well during printing but release cleanly when you use the included scraper. The 4-point leveling system is simple enough that even someone brand new to resin printing can get it dialed in on the first try.

On the downside, the build volume of 153.4 x 87 x 165mm is on the smaller side. If you want to print larger figures or batch multiple miniatures at once, you will feel the constraint. Also, the FEP film at the bottom of the vat uses a proprietary design, so you cannot swap in generic replacements. Several users on Reddit mentioned this as a frustration point.

Best Use Cases for the Photon Mono 4

This printer is ideal for beginners who want to try resin printing without a big investment. If you print tabletop gaming miniatures, small figurines, or jewelry molds, the 10K resolution gives you professional-looking results. It is also a great second printer for experienced users who want a dedicated machine for small, high-detail jobs. For more options in this category, check out our guide to resin 3D printers for miniatures.

Limitations to Consider

The smaller build volume means you cannot print large cosplay pieces or batch dozens of miniatures at once. The proprietary FEP film adds to long-term maintenance costs since you have to buy replacements directly from Anycubic. Some users also reported that the touchscreen interface feels basic and occasionally unresponsive. If you plan to print for hours daily, you may want to step up to the Mono 4 Ultra for faster speeds.

2. Anycubic Photon Mono 4 Ultra – Best Value Resin Printer

The Mono 4 Ultra takes everything good about the standard Mono 4 and cranks it up a notch. The big upgrade here is the COB (Chip on Board) light source paired with Fresnel lenses, which gives you a light uniformity rate above 90 percent. In my testing, this translated to noticeably more consistent prints across the entire build area, with no soft corners or under-cured sections.

Print speed jumps from 70mm/h to 120mm/h, which is a significant improvement when you are running batch prints. The ACF film combined with the Intelligent Release Algorithm reduces peel force, meaning fewer failed prints and less wear on your resin vat. I ran about 30 prints through this machine and had zero failures related to adhesion or peeling.

The 5 intelligent inspection features are genuinely useful. The printer checks for resin levels, detects whether the build plate is installed, and monitors for errors before they ruin a print. This is the kind of thing that saves you from coming back to a failed 8-hour print job.

The main trade-off is the same small build volume as the standard Mono 4 at 153.4 x 87 x 165mm. You are paying more for speed and reliability, not for a larger print area. The mobile app also has connectivity issues that multiple users have flagged. I found it easier to just use the USB connection and skip the app entirely.

Best Use Cases for the Mono 4 Ultra

This is the sweet spot for hobbyists who print miniatures regularly and want faster turnaround without sacrificing detail. The 10K resolution combined with the COB light source produces some of the cleanest small prints I have seen from any resin printer at this price. It also works well for jewelry designers who need precise molds and small production runs.

Limitations to Consider

The resin odor is stronger than expected, so you need a well-ventilated space or an enclosure with ventilation. App connectivity problems mean you should not rely on remote monitoring. The FEP tank film is fragile and needs careful handling during resin changes. If you want WiFi printing that actually works reliably, you might want to look at the Photon Mono M7 PRO instead.

3. Anycubic Kobra X – Best Multi-Color FDM for Beginners

The Kobra X is Anycubic’s answer to multi-color printing, and it does the job impressively well for the price. Native 4-color printing means you can produce prints with up to 19 color variations when you chain four ACE 2 Pro units together. I tested it with a simple 4-color test print, and the color transitions were clean with minimal bleeding at the boundaries.

Speed is another strong point. The 600mm/s maximum print speed with a hardened steel nozzle means you are not waiting all day for prints to finish. The LeviQ 3.0 auto bed leveling uses a 49-point calibration grid, and in my testing it produced a perfectly level first layer every single time. No manual adjustment needed.

One thing that really impressed me is how quiet this printer runs. At 45dB, it is quieter than a normal conversation. I had it running on my desk while working and barely noticed it. The AI camera with spaghetti detection is a nice bonus, though you will want to set it up properly to get reliable alerts.

The filament waste reduction is worth mentioning too. Anycubic claims an 81.25 percent reduction in waste and travel path compared to older designs. In practice, I noticed less purge material during color changes, though multi-color printing always generates some waste by nature.

Best Use Cases for the Kobra X

Families and beginners who want to jump into multi-color printing without spending premium money will love this printer. It supports a wide range of filaments including PLA, PETG, TPU, PVA, and ASA, giving you flexibility for different projects. The 10,000+ model library accessible through the app gives new users plenty to print right away.

Limitations to Consider

The phone app works but feels unfinished, with occasional lag and limited features. Some users reported quality control inconsistencies between units, so it is worth buying from a retailer with a good return policy. The slicer software has a learning curve if you are coming from Cura or PrusaSlicer. Also, for true 8-color printing you need to buy additional ACE 2 Pro units, which adds to the total cost.

4. Anycubic Kobra S1 Combo – Multi-Color with Filament Drying

The Kobra S1 Combo pairs the printer with Anycubic’s ACE PRO multi-filament system. The standout feature here is the dual PTC heating module with 360-degree hot air circulation for drying filament. If you live in a humid climate or have had filament go bad on you, this built-in drying system solves a real problem without needing a separate dryer.

Print quality is genuinely good when everything is working right. The 600mm/s maximum speed with 20,000 mm/s squared acceleration makes this one of the faster printers in Anycubic’s lineup. The 250 x 250 x 250mm build volume gives you plenty of room for medium to large prints, and the Anycubic Kobra OS with flow compensation helps produce clean surface finishes.

However, this printer has drawn mixed reviews, and I can see why. The ACE PRO system sometimes has synchronization issues where filament loading or unloading gets stuck. WiFi connectivity problems are well-documented by users on Reddit. One user in the r/anycubic community described spending hours troubleshooting the wireless connection before giving up and switching to a USB cable.

The 3.8-star average rating reflects these frustrations. About 17 percent of reviews are 1-star, mostly citing hardware issues and connectivity. That said, the 60 percent of users who gave it 5 stars report excellent print quality. Recent firmware updates appear to have fixed many of the early issues, so your experience may depend on when you buy.

Best Use Cases for the Kobra S1 Combo

This printer makes sense for users who want multicolor printing with integrated filament management. The drying system alone justifies the upgrade over simpler models if you regularly work with hygroscopic materials like PETG or nylon. The 250mm cubic build volume hits a nice sweet spot for most projects, from functional parts to display models.

Limitations to Consider

The ACE system’s synchronization issues mean this is not a set-it-and-forget-it printer. You should expect some troubleshooting, especially with WiFi. Filament waste during multicolor prints is significant, which increases your ongoing material costs. If you want a more reliable enclosed multicolor experience, the Kobra S1C may be worth the extra consideration despite having fewer reviews.

5. Anycubic Kobra S1C – Best Enclosed Multi-Color FDM Printer

The Kobra S1C is Anycubic’s best overall FDM printer right now. It is a fully enclosed CoreXY machine with built-in 4-color printing and active filament drying. I had this thing printing within 45 minutes of unboxing it, and the first test print came out nearly perfect. The full-auto calibration with one-click leveling actually works as advertised.

The enclosed chamber is the key advantage here. It keeps temperatures stable, which prevents warping on materials like ABS and ASA that are notoriously difficult to print on open-frame machines. The vibration compensation and flow rate calibration produce noticeably smoother surface finishes compared to the non-enclosed Kobra models. At 4.7 stars with early reviews, users are clearly impressed.

The quick-swap nozzle design is something I wish more printers had. Instead of unscrewing and potentially damaging a hot end, you just pop the nozzle out and snap a new one in. The filtered vent system also helps manage fumes when printing with materials that produce odors.

The one real downside is the filament management with ACE Pro units. When you run multicolor prints, filament can tangle during the loading and unloading process. Several early reviewers flagged this issue. The purge waste is also significant in multicolor mode, which is a common complaint across all multi-color FDM printers, not just Anycubic.

Best Use Cases for the Kobra S1C

This is the best Anycubic printer for serious hobbyists and small studios who need reliable, enclosed printing with multi-color capability. The enclosed design makes it suitable for printing engineering filaments like ABS, ASA, and PETG without warping issues. It also works well as a shared family printer since the enclosure keeps little fingers away from hot components. For more professional-grade options, see our guide to the best professional 3D printers.

Limitations to Consider

The enclosed design means the usable build area is slightly less than the raw specifications suggest. The app works but is not as polished as Bambu Lab’s software. Multicolor printing generates significant waste, so factor in higher filament costs. Being a very new model (March 2026 release), the community knowledge base and troubleshooting resources are still developing. Also, connecting two ACE Pro units for 8-color printing adds considerable cost.

6. Anycubic Photon Mono M7 PRO – Best High-Speed Resin Printer

The Photon Mono M7 PRO is built for speed without sacrificing quality. That 14K monochrome LCD screen (13,312 x 5,120 pixels) produces an XY resolution of 16.8 x 24.8 micrometers, which translates to incredibly fine detail on your prints. But the real story here is the 170mm/h print speed, which is one of the fastest in Anycubic’s resin lineup.

The COB LighTurbo 3.0 light source system delivers consistent UV output across the entire 10.1-inch screen. I tested it with a detailed miniature that had thin weapons and intricate armor patterns, and every detail came through crisp. The build volume of 222.6 x 126 x 229mm is generous for a resin printer, letting you batch multiple miniatures or print larger single pieces.

The dynamic temperature-controlled resin vat and auto-fill feature are thoughtful additions. The vat heats resin to an optimal temperature for consistent curing, and the auto-fill system means you can run longer prints without manually topping off resin. Six types of intelligent detection monitor for common failure points.

However, this printer has some reliability concerns. Multiple users reported screen defects developing after several months of regular use. Random error messages about residue detection or print bed installation can interrupt prints without clear cause. The top cover is also heavy and awkward to remove, which makes accessing the vat frustrating.

Best Use Cases for the Photon Mono M7 PRO

Intermediate to advanced resin printers who need speed and a larger build area will benefit most from this machine. The combination of 14K resolution and 170mm/h speed makes it ideal for batch production of miniatures, detailed figurines, or small production runs of resin parts. The auto-fill feature is a real time-saver for long print jobs.

Limitations to Consider

Long-term screen reliability is a concern based on user reports. The random error messages can be frustrating and sometimes require restarting prints. Customer support response times are inconsistent, with some users on Reddit reporting weeks-long waits. The 33.3-pound weight and bulky design mean you need a dedicated, sturdy workspace. If you want more reliable build quality with similar resolution, the Photon P1 is worth considering despite its slower speed.

7. Anycubic Kobra 3 Max – Best Large Format FDM Printer

If build volume is your top priority, the Kobra 3 Max delivers with a jumbo 420 x 420 x 500mm build area. That is large enough to print cosplay helmets, prop weapons, or functional parts in a single piece instead of splitting them into multiple sections. For creators working on large projects, this is one of the most affordable ways to get that kind of capacity.

The 600mm/s print speed with 10,000 mm/s squared acceleration keeps things moving fast even on large prints. SG15 high-precision bearings and a dual-axis core design provide stability. The large removable magnetic build plate makes it easy to remove finished prints, and it is washable too.

Unfortunately, this printer has the lowest rating in our lineup at 3.6 stars, and the user feedback tells the story. About 20 percent of reviews are 1-star, with common complaints about high failure rates, motherboard fan failures, and non-responsive customer support. Several Reddit users reported that their units required replacement within the first few months.

The printer also physically shakes at high speeds, which can affect print quality and cause the machine to walk across your desk or table. The AI monitoring feature requires a separate camera purchase, which feels like an unnecessary extra cost on an already expensive machine.

Best Use Cases for the Kobra 3 Max

This printer is for makers who genuinely need that massive 420mm build area. Cosplay builders, prop makers, and anyone printing large functional parts will find the capacity hard to beat at this price. For more options in this category, see our guide to large format 3D printers for cosplay and props.

Limitations to Consider

Reliability is the main concern. You should buy from a retailer with a solid return policy and consider an extended warranty. The shaking at high speeds means you need to bolt this down or place it on a heavy, stable surface. Multicolor printing requires purchasing the ACE Pro separately, and the filament purge waste is substantial. Customer support has been described as hit-or-miss by many users.

8. Anycubic Photon P1 – Best Premium Resin Printer

The Photon P1 sits at the top of Anycubic’s resin lineup, and the print quality shows it. The 14K monochrome LCD with 16.8 x 24.8 micrometer XY resolution produces some of the finest details I have seen from any resin printer. But what really sets this machine apart is the ball screw stability system, which eliminates the Z-axis wobble that plagues cheaper resin printers.

Wave Release Technology reduces release force by 60 percent, meaning fewer failed prints and longer FEP film life. The Smart Leveling 3.0 comes factory calibrated, so you literally just pour in resin and start printing. It handles resins up to 8,000 cps viscosity, which opens the door to engineering-grade resins that budget printers cannot use.

Operation is whisper quiet compared to other resin printers. I ran prints overnight without any noise disturbance. The AI-powered inspection system monitors for common issues, and the build quality feels solid with premium materials throughout.

The biggest drawback is the print speed. At a maximum of 50mm/h, this is significantly slower than the M7 PRO at 170mm/h. If you are running a production workflow where speed matters, this will feel painfully slow. The WiFi connectivity is also limited to Anycubic’s own slicer software, and the built-in camera is only 680p, which is barely useful for monitoring prints.

Best Use Cases for the Photon P1

Professional users and serious hobbyists who prioritize print quality over speed will love this machine. It excels at producing highly detailed miniatures, jewelry patterns, dental models, and engineering prototypes where every micron matters. The ability to handle high-viscosity resins makes it versatile for specialized applications. For broader options in this range, check out our 3D printers under $500 guide for comparisons.

Limitations to Consider

The 50mm/h speed makes this one of the slower resin printers in Anycubic’s lineup, so it is not ideal for high-volume production. The WiFi limitation to Anycubic’s slicer means you cannot use popular alternatives like Lychee or Chitubox over wireless. The poor camera quality makes remote monitoring impractical. Some units have shipped with defective UV lights, so test your printer thoroughly when it arrives.

Buying Guide: How to Choose the Best Anycubic 3D Printer

Choosing between Anycubic’s FDM and resin printers comes down to what you want to print and how much post-processing you are willing to do. Here is how I break it down for people who ask.

FDM vs Resin: Which Anycubic Printer Type Is Right for You?

FDM printers like the Kobra series melt plastic filament and deposit it layer by layer. They are better for functional parts, larger prints, and multi-color work. You get a decent build volume, wider material choices, and prints that are ready to use right off the plate. The Kobra S1C and Kobra X are Anycubic’s strongest FDM options in 2026.

Resin printers like the Photon series use UV light to cure liquid resin one layer at a time. They produce dramatically finer details than FDM printers but require handling toxic resin, washing prints in isopropyl alcohol, and UV curing after printing. The Photon Mono 4 Ultra offers the best balance of price and performance for most people getting into resin printing.

Build Volume: How Much Space Do You Actually Need?

Most Anycubic resin printers offer build volumes between 150-230mm on the longest axis. That is plenty for miniatures, jewelry, and small figurines. If you want to print larger pieces or batch more items per run, the Photon Mono M7 PRO with its 10.1-inch screen gives you significantly more room.

For FDM printing, the Kobra S1C offers a standard 250mm cubic build volume, while the Kobra 3 Max stretches to 420 x 420 x 500mm for truly large projects. Think about the biggest single piece you plan to print and choose accordingly. Going too small means splitting models into glued sections, while going too large wastes money on capacity you never use.

Key Features That Actually Matter

Auto bed leveling is non-negotiable in 2026. Every Anycubic printer in this roundup includes some form of auto leveling, but the quality varies. The LeviQ 3.0 on the Kobra X and S1C with 49-point calibration is the most reliable I have tested. The Photon P1’s factory-calibrated Smart Leveling 3.0 is also excellent.

Print speed matters more than most people realize. Faster printers let you iterate quicker and produce more in less time. The Kobra FDM printers all hit 600mm/s, while resin speeds range from 50mm/h on the Photon P1 to 170mm/h on the M7 PRO.

Multi-color capability is worth paying for if you want colorful prints without painting. The Kobra X, S1 Combo, and S1C all support 4-color printing out of the box, expandable to 8 colors with additional ACE Pro units. Be aware that multicolor printing generates significant filament waste.

Budget Tiers and What to Expect

Under $300, you are looking at entry-level resin printers like the Photon Mono 4 and Mono 4 Ultra. These deliver great detail for the price but have smaller build volumes. In the $300-$500 range, you get FDM printers with multi-color capability and faster speeds. The Kobra X at $329.99 is particularly strong value. Above $500, you are paying for premium features like the Kobra 3 Max’s massive build volume or the Photon P1’s ball screw precision system.

Remember that the printer price is just the starting cost. Resin printers need ongoing resin, isopropyl alcohol, FEP films, and nitrile gloves. FDM printers need filament, and multicolor printing multiplies your material costs. Budget for accessories and consumables when making your decision.

Frequently Asked Questions

Conclusion

After testing and comparing all the current Anycubic models, a few clear winners stand out. The Anycubic Kobra S1C is the best overall choice for FDM printing, with its enclosed CoreXY design, reliable auto leveling, and built-in multi-color capability. For resin printing, the Anycubic Photon Mono 4 Ultra hits the perfect balance of price, speed, and print quality with intelligent error detection that saves you from failed prints.

If you are just starting out and want to spend as little as possible, the Anycubic Photon Mono 4 gets you into resin printing with 10K resolution for under $200. For large format work, the Kobra 3 Max offers unmatched build volume, though reliability concerns mean you should buy with a solid warranty.

The best Anycubic 3D printers in 2026 cover a wide range of needs and budgets. Whether you are printing miniatures for tabletop games, cosplay props, functional prototypes, or colorful display pieces, there is an Anycubic model built for your workflow. Pick the one that matches your projects, budget for consumables, and start creating.