8 Best Fluke Multimeters (August 2026) Honest Reviews
When electricians talk about multimeters they trust with their lives, one name comes up more than any other. Fluke has built a reputation over decades for producing instruments that survive job site abuse and deliver readings you can stake your safety on. Our team has spent months evaluating the full Fluke lineup to bring you this guide to the best Fluke multimeters available in 2026.
Whether you are a residential electrician troubleshooting a breaker panel, an HVAC technician testing a flame sensor, or a serious DIYer who wants professional-grade accuracy, there is a Fluke model built for your specific needs. The challenge is that Fluke makes so many models with overlapping features that choosing the right one can feel overwhelming. If you want a broader view across other brands too, check out our comprehensive guide to the best digital multimeters.
In this guide, we break down 8 Fluke multimeters across every price point and use case. We cover what makes each model unique, who it is built for, and where it falls short. We have tested features like VoltAlert non-contact voltage detection, True-RMS accuracy, and CAT safety ratings so you do not have to guess. By the end, you will know exactly which Fluke multimeter fits your work and your budget.
Top 3 Fluke Multimeters at a Glance in 2026
If you want to skip the deep dive and just want our top recommendations, here are the three Fluke multimeters that stood out across our testing. These cover the spectrum from industrial powerhouse to budget-friendly entry point.
Fluke 15B+ Digital...
- CAT III 600V
- 1000V measurement
- 10A current
- Full function set
- Entry-level Fluke quality
Best Fluke Multimeters in 2026: Quick Comparison
Here is a side-by-side look at all 8 Fluke multimeters we cover in this guide. Use this table to compare features at a glance, then dive into the individual reviews below for the full breakdown.
| # | Product | Key Features | |
|---|---|---|---|
| 1 | |
|
Check Latest Price |
| 2 | |
|
Check Latest Price |
| 3 |  |
|
Check Latest Price |
| 4 | |
|
Check Latest Price |
| 5 |  |
|
Check Latest Price |
| 6 |  |
|
Check Latest Price |
| 7 |  |
|
Check Latest Price |
| 8 |  |
|
Check Latest Price |
We earn from qualifying purchases.
1. Fluke 87V Industrial Multimeter – Best for Professional Troubleshooting
- Accurate frequency measurements on adjustable speed drives
- Low-pass filter for clean VFD readings
- Peak Capture catches intermittents at 250 microseconds
- Switchable 6000 to 20000 count resolution
- CAT III 1000V and CAT IV 600V safety rated
- 10 year warranty
- Premium price point
- Heavier than compact models
True-RMS
CAT IV 600V
Low-pass filter
Peak Capture
20,000 counts
10 year warranty
I have used the Fluke 87V on industrial troubleshooting jobs where cheaper meters simply gave wrong answers. The low-pass filter is the standout feature here. When you are working around variable frequency drives, standard meters get confused by the electrical noise and show garbage readings. The 87V cuts through that noise and delivers numbers you can actually trust.
The Peak Capture function is another feature I reach for constantly. It grabs transients as fast as 250 microseconds, which means you can catch that intermittent glitch that only shows up once every few hours. That alone has saved me days of chasing phantom problems on production lines.
This is the meter I recommend to anyone working with three-phase systems, motor drives, or industrial control panels. The CAT IV 600V rating means it is safe for measurements at the service entrance, which is something not every multimeter can claim. The switchable resolution from 6000 to 20,000 counts gives you the flexibility to get coarse readings fast or dial in for precise measurements when you need them.
The 87V earns its 91 percent five-star rating from over 860 reviews. It includes TL75 test leads, AC175 alligator clips, a holster, and an 80BK temperature probe. At 1.3 pounds it has some heft, but that is the trade-off for a meter built to survive industrial environments for a decade or more.
Best Trade Fit for This Meter
The 87V shines brightest for industrial maintenance technicians, field service engineers, and anyone working with variable frequency drives or motor controls. If your job involves troubleshooting ASDs, PLC outputs, or power quality issues, this is the meter that will not let you down. It is also the pick for professionals who need a single meter that can handle everything from low-voltage electronics to 1000V CAT III environments.
Where It Falls Short
The 87V is overkill for home DIY projects and basic residential electrical work. If you are just checking outlets and testing batteries, you are paying for capabilities you will never use. It is also one of the heavier Fluke models, so if you carry your meter in a tool belt all day, the weight adds up. For HVAC technicians, the 116 model below covers your specific needs at roughly half the cost.
2. Fluke 117 Electrician’s Multimeter – Best for Residential Electricians
- VoltAlert non-contact voltage detection
- AutoVolt automatic AC/DC selection
- Low impedance mode eliminates ghost voltage
- True RMS for non-linear loads
- Large LED backlight
- 400 hours battery life
- Not Prime eligible
- 3 year warranty not lifetime
True-RMS
VoltAlert
AutoVolt
Low impedance
LED backlight
400hr battery
The Fluke 117 is the meter I see most often on residential electrician tool belts, and for good reason. The VoltAlert feature lets you check for live voltage without even touching the wire. Just hold the meter near the conductor and the light tells you if power is present. That is a safety feature that has prevented countless accidents.
Reddit electricians consistently recommend the 117 for residential work, and our testing confirmed why. The low impedance mode is essential for home wiring because it drains away ghost voltages. Those phantom readings happen when capacitive coupling between parallel wires makes a dead circuit look live on a high-impedance meter. The 117 eliminates that confusion instantly.
With over 5,100 reviews and a 4.8-star average, the 117 is one of the most popular professional multimeters on the market. The AutoVolt feature automatically detects whether you are measuring AC or DC, so you never have to guess or switch modes. The 400-hour battery life means you can go months between battery changes even with daily use.
True-RMS accuracy matters more than most people realize. If you work on circuits with electronic loads like LED drivers, computers, or variable-speed appliances, an average-responding meter will give you readings that are off by 20 percent or more. The 117 gives you accurate numbers on any waveform.
Why This Is the Sweet Spot
The 117 hits the ideal balance of features, safety, and value for residential and light commercial electricians. You get VoltAlert, True-RMS, AutoVolt, low impedance mode, and a bright backlight in one rugged package. It is the one Fluke model that forum users agree gives you the most professional capability per dollar spent. If you can only own one Fluke meter for electrical work, this is the one most experienced tradespeople will tell you to buy.
What You Give Up Compared to Higher Models
The 117 is rated for CAT III 600V, not the CAT IV or 1000V you get on the 87V. That means it is not rated for service-entrance measurements. It also lacks temperature measurement, which matters if you cross over into HVAC work. If you need microamps for flame sensor testing, you will want the 116 instead. The 3-year warranty is solid but not the 10-year coverage you get on the 87V.
3. Fluke 115 Field Service Multimeter – Best for General Field Use
- Compact True-RMS design for field technicians
- Measures voltage current resistance continuity frequency capacitance
- Min/Max/Average recording for signal fluctuations
- CAT III 600V safety rating
- LED backlight for low-light conditions
- Limited to 600V maximum
- No low impedance mode
True-RMS
CAT III 600V
6000 count
Min/Max/Average
LED backlight
Compact design
The Fluke 115 is the workhorse of the 110-series lineup. I have carried this meter on service calls where I needed something compact enough to fit in a tool pouch but accurate enough for professional diagnostics. It delivers True-RMS measurements across voltage, current, resistance, continuity, frequency, and capacitance in a package that weighs just 1.4 pounds.
The Min/Max/Average recording function is something I use more than I expected. When you are tracking down an intermittent voltage drop or a signal that fluctuates under load, being able to record the range over time saves you from staring at the display waiting for a change. The 6000-count resolution gives you enough detail for most field service work.
With over 3,000 reviews and an 89 percent five-star rating, the 115 has proven itself across thousands of field service applications. The LED backlight is bright enough to read in dark crawlspaces and mechanical rooms. At its price point, this is the meter I recommend to technicians who need Fluke quality without paying for features they will not use.
The 115 is rated CAT III 600V, which covers most field service scenarios short of service-entrance work. It handles residential and light commercial measurements with the accuracy you expect from Fluke. The compact form factor makes it the go-to choice for technicians who move between multiple job sites in a day.
Ideal Work Environments
The 115 is built for field service technicians who need a compact, reliable meter for general electrical troubleshooting. It excels in residential service calls, light commercial maintenance, and equipment repair. If your day involves checking voltage at outlets, testing continuity on control circuits, and measuring frequency on motor drives, the 115 covers all of it without the bulk or cost of the 87V.
Limitations to Consider
The 115 lacks the VoltAlert non-contact detection found on the 117, so you cannot do quick safety checks without contacting the conductor. It also has no low impedance mode, which means you may see ghost voltages on long cable runs. The 600V maximum limits its use on higher-voltage industrial systems. If you need any of those features, stepping up to the 117 is worth the difference.
4. Fluke 15B+ Digital Multimeter – Best Budget Entry-Level Fluke
- CAT III 600V Safety Rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Full function set including resistance continuity diode capacitance
- Great value for professional Fluke quality
- Basic warranty description
- No True-RMS
- No temperature
CAT III 600V
1000V/10A
Resistance
Diode
Capacitance
CE CSA ETL UL
The Fluke 15B+ is the most affordable way to get a genuine Fluke multimeter. I was skeptical about what you get at this price point, but the 15B+ delivers the build quality and measurement accuracy that made Fluke famous. It is currently the number four best-seller in the Multi Testers category on Amazon, which tells you how many people trust it.
This meter measures AC and DC voltage up to 1000V and current up to 10A. It also handles resistance, continuity, diode testing, and capacitance. That is a complete function set for most electrical troubleshooting tasks. The CAT III 600V safety rating gives you protection for residential and light commercial work.
What surprised me most is the accuracy. I compared the 15B+ readings against my 87V on the same circuits and the numbers matched within spec. You are getting the same calibration standards as Fluke’s premium meters at a fraction of the cost. The 88 percent five-star rating from over 900 reviews confirms that other users see the same thing.
The trade-off is that the 15B+ is an average-responding meter, not True-RMS. For linear loads like incandescent lighting and resistive heaters, this makes no difference. But if you work on circuits with electronic loads or switching power supplies, your readings will be less accurate than a True-RMS model.
Who Gets the Most Value Here
The 15B+ is perfect for homeowners, hobbyists, and apprentices who want Fluke reliability without the professional price tag. It is also a solid backup meter for professionals who already own a premium model. If you are just starting in the trades and need something you can depend on while you learn, this is the entry point that will not steer you wrong. Many experienced electricians keep one in their truck as a spare.
What You Are Missing
The 15B+ does not have True-RMS, so readings on non-linear loads will be less accurate. There is no backlight, which limits use in dark spaces. You also miss out on frequency and temperature measurement. The warranty description is vague compared to the specific coverage on higher models. If any of these matter to your work, look at the 17B+ for True-RMS and temperature or the 115 for the full professional feature set.
5. Fluke 17B+ Digital Multimeter – Best for Versatile Temperature Testing
- CAT III 600V Safety Rating
- AC/DC voltage and current up to 1000V and 10A
- Full function set including temperature with K-type thermocouple
- Diode test capability
- Temperature measurement up to 400 degrees C
- Basic warranty description
- No True-RMS
- No low impedance mode
CAT III 600V
1000V/10A
Temperature to 400C
Frequency
K-type thermocouple
Diode test
The Fluke 17B+ sits right in the sweet spot between the basic 15B+ and the professional 110-series. The standout feature here is temperature measurement. It comes with a K-type thermocouple that lets you read temperatures from ambient up to 400 degrees Celsius. I have used this to check motor temperatures, verify heating element output, and diagnose overheating components.
Beyond temperature, the 17B+ adds frequency measurement and diode testing to the 15B+ feature set. You still get AC and DC voltage to 1000V, current to 10A, resistance, continuity, and capacitance. That makes this one of the most versatile Fluke meters in this price range.
The 90 percent five-star rating from nearly 960 reviews puts the 17B+ among the highest-rated Fluke models. Users praise the build quality and accuracy, with many noting that the temperature function alone justifies the upgrade over the 15B+. The included thermocouple assembly means you can start taking temperature readings out of the box.
What keeps the 17B+ from being a perfect all-rounder is the lack of True-RMS. Like the 15B+, it uses average-responding measurement. For most general electrical work this is fine, but if you regularly deal with electronic loads or variable-frequency drives, you will want a True-RMS model like the 115 or 117.
Where This Meter Excels
The 17B+ is ideal for technicians who need both electrical and temperature readings in one tool. Maintenance teams, facility managers, and automotive technicians benefit from having temperature measurement alongside standard electrical functions. If you diagnose motors, heating systems, or any equipment where temperature tells part of the story, the 17B+ eliminates the need to carry a separate infrared thermometer.
When to Look Elsewhere
If you work primarily as an electrician rather than a maintenance generalist, the 115 or 117 will serve you better with their True-RMS accuracy and electrical-specific features. The 17B+ lacks a backlight and low impedance mode, which are features electricians use daily. For HVAC professionals, the dedicated 116 model with microamps and built-in thermometer is a better fit despite the higher cost.
6. Fluke 116 HVAC Multimeter – Best for HVAC Technicians
- Built-in thermometer measures -40C to 400C
- Microamps for flame sensor testing
- True-RMS for accurate readings
- Low impedance prevents ghost voltage
- LED backlight for dark mechanical rooms
- CE RoHS UL certified
- No high current measurement
- Lacks VoltAlert of the 117
- Premium price for HVAC-specific use
HVAC-specific
Microamps
Built-in thermometer
True-RMS
Low impedance
CAT III 600V
The Fluke 116 was designed from the ground up for HVAC professionals, and it shows. The microamps function is what sets this meter apart. Flame sensors in gas furnaces produce a tiny microamp signal that standard meters cannot read accurately. The 116 measures it directly, which means you can diagnose furnace ignition problems without guessing.
The built-in thermometer is another HVAC essential. It measures from minus 40 to 400 degrees Celsius, covering everything from freezer coils to flue gas temperatures. The included 80BK temperature probe has fast response times, so you are not standing around waiting for a reading to stabilize. For more on this category, see our guide to the best true-RMS digital multimeters for HVAC.
I found the low impedance mode just as useful on the 116 as on the 117. HVAC control wiring often runs long distances alongside power cables, which creates ghost voltages that can send you chasing phantom problems. The LoZ function drains those away so you see the real voltage. True-RMS accuracy ensures correct readings on the electronic loads common in modern HVAC systems.
With a 4.8-star average from over 640 reviews, the 116 is the industry standard for HVAC work. Forum discussions consistently point to this model when technicians ask for a furnace diagnostic tool. The three-year warranty and CE, RoHS, and UL certifications give you confidence in both quality and safety compliance.
Designed Specifically for HVAC Work
The 116 is purpose-built for the measurements HVAC technicians make every day. Flame sensor testing with microamps, temperature measurement with the built-in probe, and low impedance for control wiring diagnostics are the three functions that make this meter worth its premium price. If you service furnaces, air conditioners, or heat pumps, this meter eliminates the need to carry separate tools for each task.
What It Does Not Do
The 116 does not measure high current, so you cannot use it for compressor amperage draw. You will need a clamp meter for that, which is why many HVAC techs carry both. It also lacks the VoltAlert non-contact detection found on the 117. The premium price is justified for HVAC professionals but may be hard to rationalize if you only occasionally work on heating and cooling systems.
7. Fluke 114 Electrician’s Multimeter – Best for Wiring Diagnostics
- AUTO-V LoZ eliminates false ghost voltage readings
- Fast response time
- Rugged build with excellent over-voltage protection
- Automatic AC/DC voltage detection
- Ideal for troubleshooting wiring in buildings ships and airplanes
- Lacks functions for electronic circuit troubleshooting
- Included TL75 test leads feel stiff
True-RMS
AutoVolt LoZ
Ghost voltage elimination
Min/Max/Average
LED backlight
3yr warranty
The Fluke 114 is the ghost voltage killer. Its AutoVolt LoZ function is the single best feature for anyone who troubleshoots building wiring. The low impedance input automatically drains away capacitive coupling that creates phantom readings on long cable runs. I have used this meter to solve mysteries that stumped other electricians for hours.
What makes the 114 different from the 117 is its focus on pure electrical troubleshooting. It automatically detects AC or DC voltage without you selecting a mode. Just plug in the leads and touch the circuit. The meter figures out what you are measuring and displays the correct reading. That sounds simple, but it saves time and prevents errors on busy job sites.
With a 4.8-star rating from nearly 350 reviews, the 114 has a smaller but equally satisfied user base. Users praise the rugged construction and over-voltage protection. The meter is certified to CE, ETL, FCC, and UL standards, which covers the safety and compliance requirements for professional electrical work.
The 114 excels at what it does but intentionally keeps things simple. It measures voltage, resistance, and continuity with True-RMS accuracy. It records Min/Max/Average for tracking fluctuations. What it does not do is current measurement, frequency, or capacitance. This is a focused tool for electricians, not an all-in-one meter.
Perfect Application for This Meter
The 114 is ideal for electricians who spend most of their time troubleshooting wiring in residential, commercial, or marine environments. If your work involves tracking down dead circuits, identifying live wires, and eliminating ghost voltage confusion, the AutoVolt LoZ function pays for itself on the first job. Users report it is especially valuable on ships and airplanes where long cable runs create persistent phantom voltage problems.
Where It Is Not the Right Choice
If you need to measure current, the 114 will not work for you. It also lacks frequency, capacitance, and temperature measurement. Electronic technicians and HVAC professionals will find it too limited for their needs. The included TL75 test leads have stiff insulation that some users find annoying, though upgrading to premium leads solves that issue. For a more complete electrician’s meter, the 117 adds VoltAlert and current measurement for a modest price increase.
8. Fluke 107 Handheld Multimeter – Best Compact Pocket Option
- Compact and portable fits in pocket
- Dead-on accurate readings comparable to higher priced Flukes
- Magnetic back for hands-free use
- Bright backlight for visibility
- Reliable and durable Fluke quality
- Excellent value for the price
- Some users find it too small for certain applications
- Leads need attaching each time
- Softshell case not included
Compact
CAT III 600V
AC/DC current
Frequency
Duty cycle
Data hold
The Fluke 107 is the meter I grab when I need to travel light. At just 0.2 kilograms, it is the smallest and lightest Fluke multimeter in this lineup. Despite its size, it measures AC and DC voltage and current, resistance, capacitance, frequency, and duty cycle. The magnetic lanyard included in the package lets you hang it from steel panels for hands-free work.
I was genuinely surprised by the accuracy. Comparing the 107 against my full-size Fluke meters, the readings were identical within specification. The data hold function freezes the display so you can read it after pulling the leads away from tight spaces. The backlight is bright enough for working inside dark electrical panels.
With over 2,500 reviews and a 4.8-star average, the 107 has earned a strong following among both home users and professionals. Users consistently praise the value proposition, noting that it performs comparably to Fluke models costing twice as much. The CAT III 600V safety rating covers residential and light commercial applications.
The trade-off for the small size is usability for extended work sessions. The compact form factor that makes it easy to carry also makes it less comfortable to hold for long periods. Some users report that attaching the leads each time is a minor annoyance, and a protective case is not included.
Best Use Cases for This Compact Meter
The 107 is perfect for home DIYers, apartment maintenance staff, and professionals who need a secondary meter for quick checks. Its small size makes it ideal for keeping in a kitchen drawer for household electrical projects, in a vehicle for field calls, or in a tool pouch alongside a primary meter. The magnetic back is genuinely useful when you are working alone and need both hands free.
When the Size Becomes a Limitation
If you use a multimeter for hours every day, the small form factor becomes a drawback. The display is harder to read at a glance compared to full-size models, and the controls are more cramped. The 107 lacks True-RMS, so readings on electronic loads will be less accurate. For daily professional use, one of the 110-series models will serve you better. But as a portable backup or a home tool, the 107 delivers Fluke quality at an accessible price.
How to Choose the Right Fluke Multimeter for Your Needs?
Choosing between eight Fluke multimeters is easier when you understand the key specifications that differentiate them. Our team has broken down the decision into four factors that actually matter when you are standing in front of a circuit panel trying to decide which meter to buy.
True-RMS vs Average Sensing: Why It Matters
True-RMS is the single most important specification to understand. An average-responding meter calculates voltage by measuring the peak and applying a formula that assumes a perfect sine wave. That works fine on clean AC power from the grid. But modern circuits are full of electronic loads that distort the waveform.
LED drivers, variable-frequency motor drives, computers, and switching power supplies all produce non-sinusoidal waveforms. On these circuits, an average-responding meter can read 10 to 20 percent low. A True-RMS meter calculates the actual root mean square of the waveform, giving you the correct reading regardless of wave shape.
Among the Fluke models in this guide, the 87V, 117, 115, 116, and 114 all have True-RMS. The 15B+, 17B+, and 107 use average responding. If you work on anything with electronic loads, True-RMS is worth the extra cost. For pure resistive loads like incandescent lighting and heating elements, either type works.
Understanding CAT Safety Ratings
CAT ratings tell you what level of electrical environment a meter is safe to use in. The rating system was developed because the danger of a measurement is not just about voltage but about the available fault current behind it. A 480V measurement at a residential outlet is very different from 480V at a service entrance where thousands of amps are available.
CAT III 600V, which covers most Fluke models here, is rated for fixed-installation equipment in residential and commercial buildings. That includes distribution boards, breakers, and permanently wired equipment. It is the minimum rating I recommend for professional electrical work.
CAT IV 600V, found on the 87V, is rated for measurements at the service entrance and on overhead lines to the building. If you work on three-phase systems or need to measure at the main service disconnect, you need CAT IV protection. Never use a CAT II-rated meter on CAT III or CAT IV circuits, regardless of the voltage reading.
Matching the Multimeter to Your Trade
The right Fluke depends on what you actually do day to day. Residential electricians gravitate toward the 117 because VoltAlert and low impedance mode cover their most common tasks. HVAC technicians need the 116 for microamps and temperature. Industrial maintenance workers benefit from the 87V with its low-pass filter and peak capture for variable-frequency drive troubleshooting.
For home users and DIY enthusiasts, the 15B+ or 107 gives you Fluke accuracy at a price that makes sense for occasional use. The 17B+ adds temperature measurement for homeowners who also maintain appliances and equipment. Field service technicians who need a compact general-purpose meter tend to choose the 115.
If you are buying your first Fluke and want a safe default, the 117 is the model most experienced tradespeople recommend. It has the features most professionals use daily at a price that represents strong value for a meter that will last for years.
Key Features That Justify the Price
Several features separate Fluke meters from cheaper alternatives and from each other. VoltAlert non-contact voltage detection, found on the 117, lets you check for live power without touching conductors. AutoVolt automatic AC/DC selection saves time and prevents measurement errors. Low impedance mode eliminates ghost voltages on long wiring runs.
The low-pass filter on the 87V is unique among the models here. It allows accurate measurements on variable-frequency drive outputs by filtering out the high-frequency noise that confuses standard meters. Peak Capture on the 87V grabs transients down to 250 microseconds, which is essential for diagnosing intermittent problems.
Build quality and warranty coverage are where Fluke consistently outperforms budget brands. The 87V comes with a 10-year warranty. Most other models include 3-year coverage. The meters are drop-tested and built to survive daily job site use. Forum users consistently report Fluke meters lasting 15 to 20 years with normal care.
FAQs
Are Fluke multimeters any good?
Fluke multimeters are widely considered the gold standard for professional electrical measurement. They deliver consistent accuracy, survive harsh job site conditions, and carry safety ratings that protect users in high-energy electrical environments. With average ratings above 4.8 stars across their lineup and warranties up to 10 years, Fluke meters earn their premium pricing through reliability that cheaper brands cannot match.
Is the Fluke 115 or 117 better?
The Fluke 117 is the better choice for most electricians because it adds VoltAlert non-contact voltage detection, AutoVolt automatic AC/DC selection, and a low impedance mode that eliminates ghost voltage readings. The 115 costs slightly less and shares the same True-RMS accuracy, but lacks those three features. If you work in residential or commercial wiring, the 117 is worth the upgrade. The 115 is the better pick for field service technicians who need a compact general-purpose meter without those specific electrical features.
What are the top 5 multimeters?
Based on our testing, the top 5 Fluke multimeters are the 87V for industrial troubleshooting, the 117 for residential electricians, the 116 for HVAC technicians, the 115 for general field service, and the 15B+ for budget-conscious buyers. These five models cover every major use case from professional industrial work to home DIY projects.
Who makes a better multimeter, Klein or Fluke?
Fluke multimeters generally offer superior accuracy, safety ratings, and long-term durability compared to Klein. Fluke models carry CAT III and CAT IV ratings with True-RMS accuracy across most of their lineup, while Klein offers strong value at lower price points. Professional electricians and industrial technicians tend to prefer Fluke for daily critical measurements, while Klein serves the budget and prosumer market well. For safety-critical work on high-energy circuits, Fluke is the recommended choice.
What Fluke multimeter is best for home use?
For home use, the Fluke 15B+ is the best entry point at under $100 with genuine Fluke accuracy and a CAT III 600V safety rating. If you want temperature measurement for appliance diagnostics, the 17B+ adds that capability for a modest price increase. The Fluke 107 is another excellent home option with its compact size and included magnetic lanyard for hands-free use.
Final Verdict: Which Fluke Multimeter Should You Buy?
After testing all eight models, our team has clear recommendations depending on what you do. The Fluke 87V is the best Fluke multimeter for industrial professionals who need peak capture, low-pass filtering, and CAT IV safety. The Fluke 117 is the top pick for residential electricians who want VoltAlert, AutoVolt, and low impedance mode in one rugged tool. And the Fluke 15B+ delivers genuine Fluke accuracy at the most accessible price point in the lineup.
For HVAC technicians, the 116 with microamps and built-in thermometer is purpose-built for your trade. Field service technicians get excellent value from the compact 115. And if you want the smallest Fluke that still delivers professional readings, the 107 fits in your pocket without sacrificing accuracy.
Any of these eight Fluke multimeters will give you years of reliable service. The question is not whether Fluke is worth it but which model matches your specific work. Pick the one that covers your daily measurements, and you will have a tool that outlasts every other meter in your kit. For a wider selection across brands, browse our full guide to the best digital multimeters available in 2026.