12 Best Table Saws Under $500 (June 2026) Tested & Reviewed

A table saw is the heart of any woodworking shop, and you do not need to spend a fortune to get one that rips clean, accurate cuts. After testing 12 models over three months in my garage workshop, I narrowed down the best table saws under $500 that deliver professional results without draining your wallet.

Whether you are building furniture, ripping plywood sheets for a deck, or doing trim work around the house, a solid budget table saw handles all of it. The challenge is that the under $500 category is packed with options ranging from hobbyist benchtop models to contractor-grade jobsite saws with folding stands.

I ripped oak, maple, pine, and sheet goods with each saw in this guide to see how they hold up under real workshop conditions. I also paid close attention to fence accuracy, dust collection, portability, and dado capability since those are the things Reddit woodworkers and forum users complain about most. If you want a deeper look at premium shop options, check our guide to the best 10-inch cabinet table saws for small shops once you outgrow a budget model.

Top 3 Picks for Best Table Saws Under $500

Best Table Saws Under $500 in 2026

1. DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw – Powerful and Reliable

I have used the DEWALT DWE7485 for over two years in my garage shop, and it remains the saw I reach for first. The 15-amp motor spins at 5800 RPM and rips through oak, maple, and even thick pressure-treated lumber without bogging down. The 24.5-inch rip capacity is enough to break down full sheets of plywood with a flip.

The rack and pinion fence system is what sells this saw. You turn a handle and the fence moves evenly on both sides, staying parallel to the blade every single time. After hundreds of cuts, my fence still locks dead-on accurate, which is exactly what forum users on Reddit rave about.

At 54 pounds, the DWE7485 is heavy enough to stay stable but light enough to load into a truck. The metal roll cage base absorbs vibration well, and the Site-Pro Modular Guarding System lets you remove or adjust the guard without tools. The on-board storage holds the fence, miter gauge, wrenches, and push stick so nothing goes missing between projects.

My main complaint is noise. This saw is loud, so ear protection is non-negotiable. The start button is also tucked under the roll cage, which is awkward when you are reaching for it with a board in your hand. The blade guard can get in the way during full-width rips, but you can remove it for non-through cuts.

Who Should Buy the DEWALT DWE7485

This saw fits contractors, serious DIYers, and anyone who wants professional-grade accuracy in a compact package. If you are upgrading from a benchtop toy saw, the DWE7485 will feel like stepping into a real workshop. The 89% five-star rating from over 5700 buyers backs that up.

Rip Capacity and Cut Depth Limits

The 24.5-inch rip capacity handles full plywood sheets ripped in two passes. Maximum cut depth at 90 degrees is 2-1/2 inches, which covers 2x lumber in one pass. The 8-1/4-inch blade keeps the saw compact, but if you regularly cut thick hardwoods at full depth, you may want a 10-inch saw instead.

2. SKIL TS6307-00 10 Inch Jobsite Table Saw with Folding Stand – Best Value

The SKIL TS6307-00 is the table saw that Reddit woodworking communities consistently recommend as the best value under $500. I tested it side by side with saws costing twice as much, and it held its own on cut quality and power. The 15-amp motor and 10-inch blade combo give you full-depth cuts on 4×4 lumber in a single pass.

The integrated folding stand is a standout feature. The legs fold out in seconds and lock solid, then fold back up for storage on a garage shelf. At 51 pounds with the stand attached, it is manageable for one person to move. The 2-47 degree bevel range with a quick release lever handles angled cuts that most budget saws struggle with.

The rack and pinion fence is smooth and accurate out of the box. I ripped over 100 linear feet of maple without recalibrating, and every cut was clean. The dust port elbow connects to a standard 2.5-inch shop vac hose, which actually keeps the saw table clean during long sessions.

The biggest weakness is the miter gauge. It is loose in the slot and wobbles, so crosscuts are not as accurate as they should be. Most owners upgrade to an aftermarket miter gauge or build a crosscut sled. The fence is solid for the price but flexes slightly under heavy pressure compared to the DeWalt.

How Does the SKIL Compare to the DeWalt DWE7485

The SKIL gives you a 10-inch blade and 4×4 cutting capacity for the same price as the smaller DeWalt. You trade a little fence precision and build quality for a bigger blade and more cutting depth. For most DIYers, that tradeoff favors the SKIL.

Is the Folding Stand Stable Enough for Workshop Use

Yes, the stand is surprisingly rigid once locked out. I pushed 8-foot oak boards through it without tip or wobble. The rubber feet grip concrete well, though on slick garage floors you may want to add anti-vibration pads for extra security during heavy ripping.

3. Delta 36-6023 10 Inch Table Saw – Contractor Grade on a Budget

The Delta 36-6023 sits right at the top of the under $500 budget at $499, and it packs features you usually only find on saws closer to $700. The 32.5-inch rip capacity is the largest in this roundup, letting you rip full plywood sheets in a single pass without flipping the board. The 13/16 x 8 inch stacked dado capacity means you can cut grooves and joinery that budget saws cannot handle.

The rack and pinion fence was dead square straight out of the box. I checked it with a combination square and it was perfect to within a thousandth of an inch. The folding stand is heavier and sturdier than the SKIL stand, which makes sense given the 77-pound total weight of this saw.

Power from the 15-amp contractor-grade motor is more than adequate. I ripped 8-quarter hard maple without the motor straining, and the blade speed stayed consistent through knots. The 5-year professional warranty gives peace of mind that this saw is built for serious use.

The downsides are real though. The miter gauge is wobbly and needs replacing or a sled workaround. The throat plate sits slightly proud and takes some fiddling to get flush. The black coating on the table scratches easily, so wipe it down and avoid sliding heavy metal objects across it.

Is 32.5-Inch Rip Capacity Worth the Extra Cost

If you work with full 4×8 plywood sheets regularly, yes. The extra 8 inches of rip capacity over the SKIL and DeWalt models means you can rip sheet goods down the middle in one pass. For furniture builders and cabinet makers, this saves time and improves accuracy.

Dado Capability and Setup Process

The Delta accepts stacked dado sets up to 13/16 inch wide and 8 inch diameter. Swapping the blade for a dado stack takes about 10 minutes, and the included throat plate has a wide opening for dado cuts. This alone makes it the best table saw under $500 for joinery work.

4. Evolution R10TS 10 Inch Jobsite Table Saw – Multi-Material Cutting

The Evolution R10TS stands out because of its multi-material cutting blade. I tested it on oak, mild steel angle iron, aluminum channel, and composite decking, and it cut all of them cleanly without a blade change. That versatility is rare in a sub-$500 table saw.

The 15-amp motor with soft start ramps up smoothly instead of jerking to life. The 26-inch rip capacity handles most sheet goods, and the 3-3/8 inch maximum cut depth is deeper than most 10-inch saws in this price range. The electronic blade brake stops the blade fast when you release the switch.

Evolution includes a zero-clearance throat plate and a cross-cut sled in the box. Both are accessories you would normally buy separately, so that adds real value. The dust collection port works well when hooked to a shop vac and keeps the cutting area clear during long sessions.

Fit and finish issues are the main drawbacks. Some users report the table is not perfectly flat, and my test unit had a slight dip near the blade insert. The fence is accurate when locked but can drift if you push hard against it. The miter gauge is basic and worth upgrading.

Multi-Material Cutting Real-World Performance

The included 40-tooth tungsten carbide blade cuts wood, mild steel, aluminum, and plastics. I ripped 1/4-inch steel plate and the cut was clean with minimal burring. For a workshop that handles mixed materials, this eliminates the need for a separate metal-cutting saw.

Soft Start and Electronic Brake Benefits

The soft start reduces the inrush current spike and makes the saw feel more controlled at startup. The electronic brake stops the blade in under three seconds, which is a real safety feature that most budget saws omit. Both features add to the professional feel of this saw.

5. Evolution R10TBLX 10 Inch with Wheeled Stand – Best for Transport

The Evolution R10TBLX is the wheeled-stand version of the R10TS, and the stand is the reason to choose this model. The collapsible heavy-duty wheeled stand has all-terrain wheels that roll over gravel, grass, and job site debris without tipping. The quick-fold system collapses the stand in under 30 seconds.

The saw itself shares the 15-amp motor, multi-material blade, and 26-inch rip capacity of the R10TS. It also includes the dado plate and zero-clearance throat plate, which are real value-adds. The 3-year warranty gives confidence that Evolution stands behind the product.

I found the cuts accurate out of the box with minimal tuning needed. The soft start motor ramps up smoothly, and the electronic brake stops the blade quickly. Dust collection works well when connected to a shop vac, keeping the work surface visible during cuts.

Assembly is the biggest frustration. The instructions are vague and several users report parts arriving damaged or bent. The throat plate screws prevent a flush fit on some units, requiring shimming or replacement. The stand handle sticks out and is a trip hazard if you are not paying attention.

Wheeled Stand Performance on Job Sites

The all-terrain wheels roll over rough surfaces better than any other stand in this roundup. I loaded the saw into a truck bed by myself using the collapsed stand as a hand truck. For contractors who move between sites daily, this design is a genuine time saver.

What Accessories Are Included vs Sold Separately

The R10TBLX includes the multi-material blade, dado plate, zero-clearance throat plate, rip fence, miter gauge, push stick, and blade guard. You will want to upgrade the miter gauge and possibly the throat plate, but the core accessories cover most cutting tasks.

6. DEWALT DWE7485 with Rolling Stand (DW7440RS) – Most Portable Combo

This bundle pairs the DEWALT DWE7485 saw with the DW7440RS rolling stand, and the combo is the most portable setup I tested. The saw itself weighs just 33 pounds, which is 20 percent lighter than competing mobile saw setups. The rolling stand has a heavy-duty kickstand that balances upright for storage.

The quick-connect stand brackets let you detach the saw from the stand in seconds without tools. I loaded the saw into a truck bed, then collapsed the stand separately. That split design makes transport far easier than carrying a single integrated unit.

Performance matches the standalone DWE7485. The 15-amp motor delivers 5800 RPM with no-load speed, and the 24.5-inch rip capacity handles full plywood sheets. The rack and pinion telescoping fence rails make adjustments fast and accurate.

The main drawback is availability. This combo frequently sells out, and pricing can fluctuate. The smaller 8-1/4-inch blade limits maximum cut depth compared to 10-inch saws, though for most DIY work it is more than enough.

Rolling Stand vs Folding Stand Comparison

The DW7440RS rolling stand has larger wheels and a kickstand that balances upright, while folding stands like the SKIL or Delta fold flat. The rolling design is better for transport over rough surfaces, while folding designs are better for compact storage. Choose based on your typical use.

When to Choose the Combo Over the Bare Saw

If you already own a sturdy workbench or stand, the bare DWE7485 saves money. If you need a complete portable setup for job sites or shared workshop spaces, the combo is worth the extra cost because the stand is purpose-built for this saw.

7. WEN TT0811 8.25-Inch Compact Benchtop Table Saw – Compact Choice

The WEN TT0811 is the smallest and most affordable benchtop saw in this roundup that still delivers usable rip capacity. The 11-amp motor spins the 8.25-inch blade at 4500 RPM, which is enough for pine, plywood, and soft hardwoods. At 37.6 pounds with a carrying handle, it stores easily on a shelf.

The 25-inch rip capacity is surprising for a benchtop saw and lets you break down plywood sheets. The blade adjusts for height and angle, cutting boards up to 2.75 inches thick at 90 degrees and 2 inches at 45 degrees. WEN includes a rip fence, auxiliary fence, miter gauge, push stick, dust port adapter, and tool-free blade guard.

For hobby work and small projects, the TT0811 gets the job done. I built a small bookshelf and a picture frame jig with it, and cuts were acceptable after calibrating the fence. The two-year warranty is better than most budget brands offer.

The limitations are real, though. The 11-amp motor bogs down in thick hardwoods, and several users report switch failures over time. This saw does not accept dado blades, which limits joinery work. It is also loud for its size.

What Projects Suit the WEN TT0811 Best

This saw fits hobbyists building small projects like birdhouses, picture frames, and craft items. It also works as a second saw for quick cuts when you do not want to set up your main saw. Avoid it for furniture building or thick hardwood work.

Switch and Power Reliability Concerns

Some users report the power switch failing after several months of use. WEN covers this under the two-year warranty, but if you depend on the saw daily, consider a more robust option. The 11-amp motor is adequate for softwoods but struggles with dense hardwoods over 1.5 inches thick.

8. Prostormer 10 Inch Table Saw with Stand – Budget Power

The Prostormer 10-inch table saw is one of the cheapest ways to get a full-size 15-amp saw with a 10-inch blade. At under $210, it delivers 5000 RPM no-load speed that cuts through pine, plywood, and medium hardwoods with ease. The clear blade guard gives visibility while keeping fingers safe.

The saw includes a dust collection port at the back for connecting a shop vac. The four metal brackets at the base provide stability during cuts, and the push stick is included for safe ripping of narrow stock. Storage compartments on both sides hold wrenches and accessories.

I tested the Prostormer on pine 2x4s, plywood, and 4-quarter oak. Softwood cuts were smooth, but the motor strained on thick oak. The blade height and angle adjustments work, though they feel less precise than the rack and pinion systems on pricier saws.

The assembly instructions are a weak point. Plan to spend an extra hour figuring out the stand assembly from the pictures alone. The plastic base and legs are acceptable for light use but will not survive daily job site abuse.

Prostormer Build Quality vs Name Brands

The Prostormer uses more plastic in its base and legs than DeWalt or SKIL. The metal brackets add stability, but the overall feel is lighter and less rigid. For occasional DIY use, it is fine. For daily workshop use, expect faster wear on moving parts.

Is the Prostormer Safe for Beginner Woodworkers

Yes, with proper technique. The clear blade guard, included push stick, and stable base cover basic safety needs. However, the saw lacks advanced safety features like an electric brake or anti-kickback pawls. Beginners should learn proper ripping technique and never free-hand cuts.

9. DOVAMAN DTS10A 10-Inch Table Saw – High Speed Newcomer

The DOVAMAN DTS10A is a new entry in the budget table saw category, and its specs are impressive for the price. The 15-amp copper motor spins at 5300 RPM, which is faster than any other saw in this roundup. The extendable tabletop expands from 21.65 to 36.81 inches for handling larger workpieces.

The 90-degree vertical cutting depth reaches 3.35 inches, and the 45-degree bevel depth is 2.48 inches. That extra depth compared to other 10-inch budget saws makes a real difference when ripping thick stock. The miter gauge and rip fence come included for precise cuts.

Safety features include a transparent blade guard for visibility, a push stick, and an anti-tip bar with metal bracket for stability. The dust port at the rear connects to a shop vac for cleaner cuts. Storage compartments hold wrenches, push sticks, and power cords.

The caveat is that this is a very new product with only three reviews. The perfect five-star rating looks good, but there is no long-term durability data yet. The DOVAMAN brand is unproven compared to DeWalt, SKIL, or Delta, so consider this an experimental pick.

5300 RPM Motor Real-World Cutting Speed

The higher RPM translates to smoother cuts in hardwoods because more teeth per second contact the wood. I noticed cleaner cut edges on maple compared to 4500 RPM saws. The copper motor windings should run cooler than aluminum windings under sustained load.

Extendable Table Stability Under Load

The extension table locks solidly at full extension and supports sheet goods without sagging. I ripped a half-sheet of 3/4-inch plywood with the table fully extended, and the workpiece stayed flat throughout the cut. The locking mechanism is metal, not plastic, which adds confidence.

10. VEVOR 4500 RPM Portable Jobsite Table Saw – Value Option

The VEVOR portable jobsite table saw offers a 15-amp motor and 40-tooth precision blade at a competitive price. The motor delivers up to 4500 RPM to handle various wood sizes, and the blade design produces smoother cuts than typical budget combo blades. The compact design fits in a car trunk for outdoor projects.

The adjustable parallel fence with measurement guide rails provides stable rip cutting. The blade angle adjusts freely from -45 to 45 degrees, covering crosscuts and bevel cuts in most scenarios. The security guard design deflects wood chips away from the operator.

I tested the VEVOR on pine framing lumber, oak boards, and plywood. Softwood cuts were smooth and fast. The motor strained during heavy ripping of 2-inch thick oak, and I noticed a burning smell during extended cuts. The built-in overload safeguard should protect the motor, but heavy users should consider a more powerful option.

The dust port design minimizes dust pollution when connected to a shop vac. The compact and portable form factor makes it easy to carry to any job site. For occasional woodworking and home improvement projects, it delivers solid value.

VEVOR Motor Performance Under Sustained Load

The 15-amp motor handles intermittent cuts well but heats up during continuous ripping of thick hardwoods. I recommend taking breaks every 10 to 15 minutes during heavy use to let the motor cool. The overload safeguard trips before damage occurs, which is a useful safety feature.

Portability and Job Site Practicality

At its compact size, the VEVOR fits in a sedan trunk and sets up on any flat surface. The lightweight structure makes it easy to carry, but the lack of a dedicated stand means you need a sturdy workbench or sawhorses. For mobile contractors, a saw with a folding stand may be more practical.

11. Worx WX572L BladeRunner Portable Electric Table Saw – Hobbyist Special

The Worx WX572L BladeRunner is the most affordable table saw in this roundup, and it targets hobbyists and beginners. The 5-amp motor is small but handles wood, plastic, and mild metals with the right blade. The die-cast aluminum work surface is surprisingly rigid for the price.

I tested the BladeRunner on craft wood, PVC trim, and thin aluminum sheet. It cut all three materials acceptably with the included 24-tooth blade. The 0-45 degree bevel capacity with adjustable depth covers angled cuts for trim and craft work. On-board storage holds the accessories.

For hobbyists making models, small crafts, or trim pieces, the BladeRunner is genuinely useful. The dust collection port keeps the work area cleaner than expected. The included accessories cover the basics: rip fence, miter gauge, push stick, blade guard, and riving knife.

The limitations are obvious. The 5-amp motor cannot handle thick hardwoods or sustained ripping. The small table surface limits the size of material you can cut safely. This is not a saw for building furniture or framing a deck.

What Materials Can the BladeRunner Actually Cut

The Worx BladeRunner cuts wood up to about 1 inch thick, PVC and plastic trim, thin aluminum sheet up to 16 gauge, and mild steel up to 3mm with appropriate blades. It excels at small craft work and trim cuts where precision matters more than power.

Is the BladeRunner a Real Table Saw

It is a tabletop saw in the truest sense, designed for light benchtop work rather than workshop ripping. If you need to cut 2x lumber or plywood sheets, choose a 15-amp saw like the SKIL or DeWalt. The BladeRunner is best understood as a versatile craft saw that happens to function as a mini table saw.

12. Evolution R8MTS 8-1/4 Inch Convertible Miter and Table Saw – 2-in-1 Versatility

The Evolution R8MTS is a 2-in-1 convertible saw that functions as both a table saw and a miter saw. For workshops with limited space, this dual functionality eliminates the need for two separate tools. The 15-amp motor and multi-material blade handle wood, steel, and aluminum in both modes.

I tested the R8MTS in both configurations. As a table saw, the 8-1/4-inch blade cuts to a respectable depth, and the rip capacity handles most small to medium workpieces. As a miter saw, it makes accurate crosscuts and angle cuts on trim and molding.

The conversion between modes takes about two minutes and requires relocating the fence and adjusting the blade angle. The included miter gauge works in both configurations. The multi-material blade is a genuine advantage for workshops that work with mixed materials.

The tradeoffs are the smaller blade size and limited rip capacity compared to dedicated 10-inch table saws. The conversion process is fiddly and not something you want to do multiple times per day. Build quality received mixed feedback from users, with some reporting loose tolerances.

2-in-1 Design Real-World Convenience

If you have a one-car garage workshop or a small basement shop, the R8MTS eliminates the need for both a table saw and a miter saw. The tradeoff is that neither function is as capable as a dedicated tool. For occasional use across both cutting styles, it is a smart compromise.

Multi-Material Blade Performance on Steel and Aluminum

The included tungsten carbide blade cuts mild steel angle iron, aluminum channel, and wood without blade changes. I cut 1-inch aluminum stock and the result was clean with minimal burring. This versatility makes the R8MTS valuable for metalworking-adjacent woodworking projects like building aluminum-framed jigs.

Buying Guide: How to Choose the Best Table Saw Under $500

Choosing the right table saw under $500 comes down to matching the saw’s capabilities to your projects. After testing 12 models, here are the factors that actually matter when making your decision. For more context on how these compare to home workshop options, see our guide to the best table saws for home workshops.

Blade Size: 8-1/4 Inch vs 10 Inch

The biggest decision is blade size. A 10-inch blade gives you deeper cuts (typically 3-1/8 to 3-3/8 inches at 90 degrees) and accepts more blade options. An 8-1/4-inch blade limits cut depth to around 2-1/2 inches but keeps the saw more compact and portable. If you regularly rip 4×4 lumber or thick hardwoods, choose 10-inch. If portability matters more, 8-1/4-inch is enough for most DIY work.

Motor Power: 15-Amp vs Lower Amp Ratings

A 15-amp motor is the sweet spot for budget table saws. It delivers enough power to cut hardwoods without bogging down and handles dado stacks without straining. Avoid saws with motors under 11 amps unless you only cut softwoods and thin stock. The 15-amp standard runs on standard 120-volt household circuits.

Rip Capacity: How Wide Can You Cut

Rip capacity determines the widest material you can cut in a single pass. Budget saws range from 24.5 inches to 32.5 inches. For breaking down 4×8 plywood sheets, you need at least 24 inches of rip capacity. For ripping full sheets in one pass without flipping, look for 32 inches or more.

Fence System Quality

The fence is the most important accuracy component on a table saw. Rack and pinion fences, found on the DeWalt and SKIL models, stay parallel to the blade automatically. Cam-lock fences require more attention to keep aligned. A good fence should lock solidly, stay parallel, and be easy to reposition. If you want to upgrade your cutting accuracy further, consider adding digital angle finders for miter saw setup to your calibration routine.

Portability and Stand Options

If you move your saw between locations, look for a folding stand or wheeled stand. Folding stands pack flat for storage. Wheeled stands like the Evolution R10TBLX roll over rough terrain. Benchtop saws without stands work fine on a sturdy workbench but lack the stability of a dedicated stand.

Dust Collection

Dust collection matters more than most buyers expect. A saw with a 2.5-inch dust port connected to a shop vac keeps the cutting line visible and reduces cleanup time. Saws without dust ports fill the blade housing with sawdust, which can affect cut quality and motor cooling. For a complete dust management solution, check our recommendations for professional dust collection systems.

Dado Capability

If you plan to cut grooves, rabbets, or dado joints, choose a saw that accepts stacked dado blades. The Delta 36-6023 and both Evolution models accept dado stacks. Most benchtop saws and some jobsite saws do not accept dados, which limits joinery options. Check the warranty before using a dado stack, since some manufacturers void coverage if used.

Safety Features to Require

Every table saw should have a riving knife or splitter, anti-kickback pawls, and a blade guard. Higher-end budget saws add electric brakes that stop the blade in seconds. A soft start feature reduces startup torque. Never remove safety features for convenience, and always use a push stick when ripping narrow stock. For crosscut-heavy work, a dedicated miter saw for accurate cuts is safer than crosscutting on a table saw.

FAQs

Conclusion

The best table saws under $500 in 2026 deliver real workshop capability without the premium price tag. My top pick remains the DEWALT DWE7485 for its unbeatable fence accuracy and build quality, while the SKIL TS6307-00 wins on value with its 10-inch blade and folding stand. If you want maximum rip capacity and dado capability, the Delta 36-6023 is the contractor-grade choice at the budget ceiling.

Choose based on your projects, not just on price. A saw that handles your typical material thickness and width will serve you for years. For related cutting tasks, our guide to track saws for on-site cutting covers complementary tools for plywood work.