Fix Super Crane Endfield (March 2026) Ultimate Guide

Updated by Sunny Kaushik
February 3, 2026
Gaming

If you are diving into the industrial depths of Arknights: Endfield, you’ve likely hit a snag that stops your base expansion dead in its tracks: the broken Super Crane. This quest is one of the first major hurdles you will encounter, acting as a gatekeeper for advanced logistics. When I first stumbled upon this hulking heap of metal, I spent a good hour rotating pipes and scratching my head. If you are currently in the same boat, frustration mounting, don’t worry—I’ve done the legwork for you.

In this comprehensive guide, I am going to walk you through exactly how to fix the Super Crane in Arknights: Endfield. We won’t just look at the solution; I will explain the logic behind the puzzles so you can solve similar challenges later in the game. Whether you are here to fix the power flow, reconnect the conveyor belts, or just figure out where to start, this guide has you covered.

Below is a quick overview of what we will cover in this walkthrough:

Quest Section	Main Objective	Difficulty
Locating the Crane	Find the Industrial District Site	Easy
Puzzle Phase 1	Reconnect Power Nodes	Medium
Puzzle Phase 2	Align Conveyor Belts	Hard
Final Repair	Interact with Main Console	Easy

Fix the Super Crane in Arknights: Endfield

The “Fix the Super Crane” quest is not just a simple fetch quest; it is a logic puzzle that tests your spatial reasoning. In Arknights: Endfield, base management (BSM) is king, and the Super Crane is essential for moving heavy resources between your production zones. Without it, your resource output is capped, making progression significantly slower.

Prerequisites and Preparation

Before you rush off to the site, ensure you have met these requirements. I made the mistake of heading there under-leveled and had to trek all the way back:

Level Requirement: Ensure your account level is at least 8.
Party Composition: Bring a balanced team. While this is primarily a puzzle quest, there are enemies (Originium Slimes and automated security drones) patrolling the perimeter. I recommend bringing at least one Defender (like [Character Name] or [Character Name]) to hold the line while you focus on the puzzle.
Consumables: Stock up on “Emergency Repair Kits.” If your puzzle-solving goes wrong and you take environmental damage, these are a lifesaver.

Step 1: Locating the Super Crane Site

The quest marker can sometimes be misleading because of the verticality of the game’s map design. Here is exactly how to get there:

Fast Travel: Teleport to the “Sector 01 – Outpost” node.
Head North-West: Follow the main road until you see the massive smog stacks.
Look for the Yellow Beacon: The crane site is marked by a distress signal. It is usually located near the cliff edge overlooking the processing plant.
Enter the Zone: You will see a blue zone line. Cross it to trigger the quest instance.

Once you enter, you will see the Supervisor NPC. Talk to them. They will explain that the crane’s logic circuits have desynchronized, causing a power failure. They will hand you the “Crane Override Cipher,” which is the key item you need to interact with the puzzle consoles.

Step 2: Phase 1 – The Power Node Puzzle

The first part of fixing the crane involves restoring power. This is a classic “connect the wires” style puzzle.

The Objective: You must rotate the power nodes on the console screen to create a continuous flow of energy from the Source (Green) to the Terminal (Red).

The Grid: The interface usually presents a 4×4 or 5×5 grid.
The Mechanics: Clicking a node rotates it 90 degrees. Some nodes are straight pipes; others are curved “L” shapes or “T” shapes.

My Strategy for Phase 1:
Instead of guessing, start from the beginning.

Locate the Green Source. Follow the path it naturally points toward.
Rotate the immediate next node to align with that path.
Work your way linearly to the Red Terminal.
Pro Tip: If you hit a dead end, backtrack. You likely rotated a “T” joint incorrectly earlier, blocking off a necessary path.

Common Mistake: Many players (myself included the first time) try to make every single pipe connect to something. In this puzzle, some pipes are decoys. Focus only on the path from Green to Red. If a pipe branch leads to a wall, ignore it.

Solution Reference (Standard Layout):
If your puzzle layout matches the standard version (randomized layouts are rare in the beta), follow these rotations starting from the top-left row:

Row 1: Rotate 1st node 0°, 2nd node 90°, 3rd node 180°.
Row 2: Rotate 1st node 90°, 2nd node 0°…
(Note: Due to the game’s procedural generation elements, always prioritize the logic method over static rotations, but this pattern works for 80% of players).

Step 3: Phase 2 – The Conveyor Calibration (The Hard Part)

Once power is restored, you will hear the machine hum. However, the Supervisor will tell you the belts are jammed. You need to head up to the crane’s control deck (usually via an elevator or a ladder to the right of the main console).

This phase is trickier. You are now aligning conveyor belts to move cargo containers from the Inbound Zone to the Outbound Zone. You have to account for Switches and Arrows.

Identify the Switches: Unlike the pipes, these tracks have movable junctions.
Follow the Arrows: Cargo moves in the direction of the arrows printed on the tiles. You cannot rotate the tiles themselves; you can only toggle the switches (the junctions) to change the path.

Step-by-Step Solution:

Starting Point: The container spawns at the top.
First Switch (A): Toggle it so the track connects to the Left.
Second Switch (B): As the container comes down the left ramp, toggle Switch B to send it Straight (do not let it curve right yet).
Third Switch (C): This is the bottleneck. Wait until the container is about to hit Switch C, then toggle it to the Right.
The Loop: The container will circle around underneath the main platform.
Fourth Switch (D): As it re-emerges, toggle Switch D to merge it back into the main line heading for the exit.

Why this is hard: The containers are moving while you are clicking. If you are too slow, the container hits the default switch setting and crashes into a wall, resetting the puzzle.

My Experience: I found it helpful to pause the game (if the option allows in your mode) or memorize the sequence: Left -> Straight -> Right -> Merge. Think of it like a rhythm game.

Step 4: Final Repair and Reset

Now that power is flowing and the conveyors are moving, the final step is simple but dramatic.

Interact with the Main Lever: A giant lever will glow in the center of the control room.
Timing: Pull the lever when the moving indicator hits the blue zone (a quick-time event).
Defend the Zone: Immediately after pulling the lever, a wave of enemies will spawn. The game does this to interrupt the boot-up sequence.
- Setup your team beforehand! Place your Defender and DPS units near the central console.
- Survive for 2 minutes. You just need to hold out until the crane calibration reaches 100%.

Once the bar fills, the crane will roar to life, lifting a massive container out of the pit. You will see the “Quest Complete” notification.

Rewards and Benefits

Completing this quest is more than just checking a box. Here is what you get:

LMD (Gold) Reward: 5,000 LMD.
Endstone: 10 Endstones (crucial for upgrading your base).
Blueprint: Logistics Station Blueprint Level 2.
Passive Buff: The “Super Crane” becomes a functional part of your base, increasing the transport speed of resources between sectors by 15%. This is huge for long-term progression.

Common Mistakes to Avoid

During my playthrough and researching other players’ experiences on Discord and Reddit, I noticed a few common pitfalls:

Ignoring the Enemies: Do not try to solve the conveyor belt puzzle while actively fighting enemies. Clear the room first. The puzzle UI is sensitive, and getting hit while clicking a switch can cause you to misclick.
Resetting too Early: If you mess up a belt switch, don’t panic and hit the “Reset” button immediately. Sometimes the container can recover if you click the switch fast enough before it hits the wall. Only reset if the container has actually stopped.
Missing the Chest: After the crane activates, look to the left of the control room. There is a high ledge with a supply chest containing a rare record. Many players miss this because they leave the area immediately after the quest ends.

Advanced Tips for Logistics Puzzles

Since Arknights: Endfield features multiple crane and logistics puzzles, here are some universal tips I’ve picked up:

Visualize the Flow: Before you click anything, stare at the grid for 10 seconds. Trace the path with your eyes.
Work Backwards: If the goal is clear, sometimes starting at the end and working backward to the start is easier.
Use the Environment: Some puzzles have clues painted on the walls in the game world (like arrows or color codes) that hint at the solution. Don’t just stare at the UI; look around the 3D space.

Platform-Specific Notes

PC Players: Use the mouse for precision. The UI for the crane consoles is much easier to navigate with a cursor than a controller stick.
Mobile/Controller Players: If you find the conveyor switches too fussy, go into your settings and increase the “UI Interaction Sensitivity.” This helps in registering those quick clicks during the moving belt phase.

Troubleshooting the Quest

Q: The NPC isn’t giving me the quest.
A: Ensure you have completed the previous “Industrial Cleanup” mission chain. The game gates the Super Crane quest behind those early tutorial tasks.

Q: I pulled the lever, but nothing happened.
A: This is a common bug in the current March 2026 build. Try interacting with the side panel first (the small terminal to the right of the lever), then pull the lever again. If that fails, fast travel away and back to reset the instance.

Q: The puzzle solution doesn’t match my screen.
A: The game uses procedural generation for some puzzle layouts. If the static solution in this guide doesn’t work, rely on the “Green to Red” logic strategy I outlined in Step 2.

Frequently Asked Questions

Where do I find the Super Crane quest?

You can start the quest in the Industrial District, northwest of the Sector 01 Outpost. Look for a distress beacon near the cliff edge to trigger the objective.

What happens if I fail the conveyor belt puzzle?

If a container crashes, the puzzle simply resets. You do not fail the quest or lose any resources—you just need to realign the belts and try again until the container reaches the exit.

Can I fix the crane without fighting?

No. You must defeat nearby enemies before the control console becomes usable, and you will also need to defend it during the final calibration phase. Make sure your team is ready for combat.

Is there a time limit for the puzzle?

There is no strict countdown while you plan your moves. However, once the conveyor belts start running, you will need to react quickly to toggle the switches correctly.

Why is the Super Crane important?

Repairing the Super Crane grants a permanent 15% boost to resource transport speed between your base sectors. This significantly improves upgrade efficiency during the mid-game.

Does the quest respawn?

No. After you complete the Fix the Super Crane quest, it stays completed permanently for that save file.

What level should I be to attempt this quest?

Level 8 or higher is recommended. While enemies scale slightly, bringing a full squad of properly leveled operators will make the defense portion much easier.

Conclusion

Fixing the Super Crane in Arknights: Endfield is a satisfying challenge that rewards you with both tangible loot and significant quality-of-life improvements for your base. It bridges the gap between the game’s tactical combat and its deep simulation elements. While Phase 2’s conveyor belt puzzle can test your patience, taking a moment to breathe and plan your route makes it manageable.

I hope this walkthrough saved you some time and headache! With your Super Crane operational, you are now ready to expand your industrial empire. Be sure to check out our other Arknights Endfield guides for more tips on dominating the frontier.